News
-
Portable Welding Fume Collector: New Look, Better Adaptability to Scenes
The fumes generated during welding operaions not only pose a threat to workers’ health but also pollute the environment. The portable welding fume collector, with its flexible and efficient characteristics, has become an ideal choice to solve the pro...Read more -
Laser cutting dust removal equipment dust removal efficiency does not meet the standard reason analysis
During the long-term operation of laser cutting dust removal equipment, there may be a problem of substandard dust removal efficiency. This could be caused by the following reasons: Filter clogging: If the filter is clogged with dust, oil stains or other im...Read more -
Welding head of handheld laser welding machine: Motor overheating treatment
Manifestation: The home page shows that the motor is overheating and cannot be welded Cause analysis: The thermal is not plugged in or damaged Troubleshooting (either of the two options): 1. Replace with new thermal heat 2. Directly block this alarm in the...Read more -
Handheld laser welding machine: Use of spot welding function (fish scale pattern and intermittent)
The version number of the panel monitoring page corresponding to the spot welding function is: 330 or above (inclusive) I. How to use spot welding function 1.1 Home Enable spot welding mode 1.2 Select the type of spot welding inside the setting (fish scale/...Read more -
Hand-held welding machine welding head problem treatment: Burning the protective lens
Manifestation: In a short period of time, the protective mirror is damaged and the burning point appears, and the protective mirror is a little damaged point on the glossy surface, showing black or white medium black spots Cause analysis: Due to the influen...Read more -
Hand-held welding machine welding head problem treatment: burning copper nozzle
Cause analysis: During the welding process, there is heat diffusion to the copper nozzle to cause damage, the treatment process should first analyze the heat source, lens astigmatism, red light bias or external material heat conduction Solution: It should ...Read more -
Process: How does SUP23T use the cleaning function?
1. Switch the cleaning program: Switch the program through the switch button in the upper right corner of the home page, and restart after power failure. 2.Replace the appropriate focusing lens: the cleaning range of lenses with different focal lengths is ...Read more -
Huaxia Starlight Gedian Intelligent Manufacturing Base Officially Opens, Inviting Global Customers to Visit
On May 27, 2025, the intelligent manufacturing base of Huaxia Xingguang Industrial Design Co., Ltd. located in Gedian Economic and Technological Development Zone was fully put into operation. This base is committed to providing R&D, design, production a...Read more -
Advantages of laser welding machines in powder metallurgy materials
With the continuous development of science and technology, many industrial technology on the special requirements of the material, the application of smelting and casting method of manufacturing materials has been unable to meet the needs, so the use of pow...Read more -
Treatment of welding joint problem: abnormal motor swing
Problem phenomenon: ① After electrifying, the motor at the tail of welding head appears howling/abnormal red light swing/fever/unable to adjust swing width. ② Directly burn out the lens, and the sealing ring and focusing lens burn out at the same time. Caus...Read more -
MAX Laser Source 6000W Laser Cleaning System: Intelligent Industrial Cleaning Redefined
Laser cleaning is an advanced technology based on the interaction between laser beams and materials, enabling the effective removal of surface contaminants and deposits. Compared to traditional cleaning methods, laser cleaning offers non-contact operation...Read more -
Handheld laser welding machine welding head problem handling: light weak / lens damage / prevention
These conditions are encountered when welding: The light is strong at first, and slowly weakens/weakens, resulting in the inability to fuse or sparks at the copper nozzle Cause analysis: Usually for welding gun lens damage, including but not limited to prot...Read more
